Freezer room

The freezer room is mainly used to store all kinds of frozen meat (chicken, beef, mutton, fish, seafood, etc.), ice cream and other foods that need low-temperature storage. Generally, the temperature will be designed between – 15 ~ – 25C and – 23 ~ – 30C.

Installation service

If our cooling machines are hard for you to install, if local refrigeration engineers are not so reliable, you could enjoy turnkey project service by our professional engineers. We have already served many customers on installation in Vietnam, Singapore, Papua New Guinea, New Zealand, Tanzania, USA. Besides, we have finished over thousand cold room projects in China domestic.

Conceptual design

If you don’t have engineer to design the cold room for you, we can offer. Each cold room project we provide to you must be the very professional one designed by our engineer team that has over 8 year experiences. Each design we provide will fully discuss with you and meet most of your requirements.

Description

Overall scheme display of Freezer Room

Build a 15x11x3.5m freezer room to store frozen seafood for distribution. Temperature is -15 ~ -25℃ or -23 ~ -30℃ 150mm PIR insulation panels, 2.1x2.4m sliding door, 2 sets of 18hp Bitzer condensing units

Insulated panel Detail

Use 150mm PIR panel. The foaming density is 42kg / m3, grade B1 fire protection. Based on different ambient temperatures, 120mm and 180mm thickness can be selected. For example, the ambient temperature of 20 ℃ can be 120mm, and the ambient temperature of 40℃ can be 180mm.

The thickness of freezer room panel

120mm, 150mm and 180mm. Foaming density: 42kg / m3 is the best foaming density.

Floor Detail

High quality XPS panels, 250KPA.

3mm thick SBS waterproof layer, zero leakage.

2 layers of PE film vapour barrier to provide the best protection.

XPS board

As shown in the figure below

SBS water barrier

it is mainly waterproof, with a thickness of 3mm.

PE film

Moisture-proof, with a thickness of 0.2mm

Cold room doors Specifications

We usually use 2.1x2.4m sliding door to facilitate the passage of the forklift. The size can be customized. With German design and production technology, all materials are very solid, without leakage and fear of cold. High quality heater, no frosting problem.

Condensing unit Specifications

Based on 15x11x3.5m, we choose two sets of 18hp Bitzer compressors. The advantage is that each set provides half of the refrigeration capacity. If one fails, another one can support the storage temperature for a period of time, which is safe. The compressor is the original new Bitzer, German brand. Danfoss solenoid valve and pressure control, oil separator, and accumulator.

Detail

Magnesium aluminum alloy casing, no rust problem.

The fan motor use Weiguang brand

Italian brand zomoxi heater.

Detail

Full protection, can suffer power fluctuation. German Schneider brand, high quality. Multiple protections with phase sequence protection, overvoltage and undervoltage protection, overload protection.

Remote monitoring

Cold Room Remote Control Platform allows you to get cold room running status whenever and wherever you are, find the cold room failure in time for reducing food problems, managed by more than one employee, and so on.