The use and maintenance of contact plate freezer
What is contact plate freezer? Through the up and down movement of the aluminum plate inside the Contact Plate freezer, the upper and lower surfaces…
What is contact plate freezer? Through the up and down movement of the aluminum plate inside the Contact Plate freezer, the upper and lower surfaces…
As the core and the most expensive component in the HVAC industry, the compressor’s performance and maintenance have always been the most concerned issues for…
Do you need a cold room installation or any other type of cold room solution? Energy efficiency is a basic factor to consider in all…
Why should the cold room defrost? Improve the cooling efficiency of the system; Guarantee the quality of frozen products in the warehouse; Save electricity; Extend…
Summer is coming, which means that the cold room will be used more regularly to keep food fresh and frozen, so what should be paid…
Expansion valve installation guide: The expansion valve must be installed in the liquid line ahead of the evaporator, with its bulb close to the suction…
Compressors play an important part in refrigeration systems condensing units, And refrigeration compressors should be properly maintained and should be inspected, and tested on a…
Causes of Refrigerant Floodback in compressor: Refrigerant floodback in an compressor can be caused by a variety of circumstances. The majority of them may be…
The cold storage foods contain some fat, protein, and starch. So, with the presence of these nutrients, it has the possibility that mold and bacteria…
In the previous blog(The defrost parameters in electric heater defrost type), we already discuss the defrost parameters defrost cycle, defrost time and defrost end temperature.…
We know there are four types of defrosting in the cold room: 1) manual defrost; 2) electric heater defrost; 3) hot gas defrost; 4) water…
For the PU panel installation: We use cam-lock systems to connect the panels in the PU panel. Before you begin connecting, double-check that the…